At present we’re SO thrilled to welcome the superb Jamie and Morgan from Construction2Style again, for his or her first publish as a part of our contributor group! Wahoo!! We all know you really liked them right here and right here… and right here and right here… so we’re so excited to have them right here sharing often. Present all of them that Remodelaholic love and provides them a heat welcome again!
Ohhh we’re so pleased to share this challenge with our Remodelaholics! If you happen to comply with us on Instagram you may have already seen the entire enjoyable we had on this rework. So we’re much more pumped to point out you the total earlier than and after of this lavatory design together with step-by-step particulars on this contemporary wooden wall paneling and how one can add your personal wooden plank partitions to your house in 5 easy steps.
This publish comprises affiliate hyperlinks. Study extra and browse our full disclosure coverage right here.
How To Set up a DIY Wooden Plank Wall
by construction2style
Earlier than
As you possibly can see, we did a whole overhaul improve of this lavatory. The one factor we knew we needed inside this design was the wooden plank wall. We needed to create an area to really feel like a spa, a relaxed atmosphere by bringing in earthy tones and textures.
The best option to convey heat and depth into any house is by utilizing wooden supplies. So we determined that we had been going to create a big wooden wall, centered proper behind a gorgeous free standing tub to create this expertise. So let’s get began!
Supplies:
If the video doesn’t load accurately, test it out over on our YouTube channel — and subscribe, fairly please!
Step one to any lavatory rework as you understand is demo. We utterly gutted your entire room which you’ll be able to learn extra about right here.
As soon as we demo’d your entire house it was time to get the room again so as. That white wall proper there was our clean canvas for the wooden plank wall.
1. Select Materials
Step one is to decide on your materials. There are a ton of various kinds of wooden and nice choices you possibly can select from, so it in the end comes right down to the look of the house you might be wanting.
Some wooden accent wall choices to contemplate:
- Reclaimed Wooden – this may be Pallet wooden, or aged fence pickets, no matter you’re keen on the look of and do not forget that even reclaimed wooden could be planed down to seem new and contemporary when you don’t love the aged or rustic look that has that barn wooden type..
- Shiplap – made common by Joanna Gaines, Shiplap is now available at most lumber shops. At your native retailer they usually carry white shiplap pre primed. If you’re on the lookout for a stained wooden possibility for shiplap, you might have to create it like this tutorial reveals you easy methods to do.
- Slat partitions are highly regarded and add a gorgeous texture.
- Peel and Stick wooden planks /choices make set up a breeze!
Our design plan stemmed from the Kohler Design Middle, the place they’d stunning clear and easy wooden panels inside their showrooms. So to create this search for this challenge we used 4×8 sheets of maple veneer sheeting. We then we reduce the sheets down into 4″ planks. From measuring the wall the place the planks could be going we decided that we would wish rather less than 2 sheets of fabric.
Tip: If you happen to don’t have a desk noticed or round noticed with clamps, you too can get your materials reduce at Residence Depot or your native ironmongery shop when you’re a little bit nervous about getting your edges completely straight.
2. End Wooden (Minimize, Stain and Seal)
After you have chosen the kind of materials and reduce down your sheets, it’s time to stain. Once more, selecting the colour of the stain relies on the kind of look you’re going for.
For this challenge, we acquired a customized stain to match the remainder of the trim and woodwork within the dwelling. We then acquired two further shade stains, tinting one darker and one lighter than the unique to create dimension inside the design. We additionally customized constructed the vanities inside this reno and matched them completely to the wooden plank wall.
To make this challenge additional quick you possibly can take into account making an attempt stain with sealer to get the ending job executed in two-three simple coats. We love this model, or do this model.
When making use of, you’ll want to brush on with the grain to ensure the end appears nice. Additionally, I do advocate a couple of coat (particularly if that is in a toilet). Between coats you’ll want to calmly sand with 220 grit or larger sandpaper, wiping with tack cloths to take away all mud earlier than including your second coat. Sanding between coats enormously improves the graceful manufacturing facility end look of any challenge.
3. Create Design
As soon as your wooden planks are stained, sealed and dried it’s time to create your design structure. Relying on the house of your room will rely on the size to chop your panels. The hot button is to simply be sure that no piece ever strains up with the one within the row immediately above or under.
Wooden Wall Paneling Sample Concepts:
- Brick Sample
- Herringbone
- Diagonal
- Horizontal
- Vertical
- Diamond
Additionally take into account that utilizing spacers on the seams can change the look of no matter design you select. You could have to line the again with wooden for this feature.
One of the crucial traditional designs is the brick sample, which is what we selected. With this sample every of the rows is offset by a half of the boards width. It’s a timeless structure that appears nice in any room and with any materials.
We additionally determined to create a distinct segment inside the plank wall, so in fact there was a spot to set the ambiance with some candles or décor. We created the area of interest by eradicating the drywall and framing an oblong piece again in, simply excessive sufficient for excellent placement above the bathtub.
4. Measure and Minimize
After you have created your design structure it’s time to measure, reduce and cling. We reduce the boards as we had been putting them up onto the partitions, following our brick stacked sample. To determine our size to chop the boards, we measured the width of the wall and divided it by 3. Relying on the size of your wall it’s possible you’ll have to divide it by extra.
A straightforward option to be sure you reduce the boards to an equal size each time is to arrange a cease in your miter noticed. Simply remember, the explanation we trimmed boards as we went, is that not all partitions are completely sq., and chopping separately, helps to keep away from gaps.
5. Set up
Our favourite half, watching your design and challenge all come collectively.
Beginning with a pleasant stage line, we began putting in the primary row of wooden simply above the area of interest, gluing our first board into place with liquid nails. It’s also possible to add a pair end nails with a pin nailer or simply an old school hammer and nails.
Tip: **If utilizing a hammer, you’ll want to use a nail set to keep away from damaging the entrance of your superbly completed boards.
Tip: to keep away from giant nail holes a pin nailer is a dream come true.
As a result of this row will likely be carrying among the weight of the rows above, it won’t be a foul thought to make use of a stud finder so as to add a pair nails to the studs. We then progressively moved up ensuring every board was stalked half method over the board beneath.
If you happen to don’t have a distinct segment to fret about, we’d have began on the prime left hand nook. If beginning on the prime, guarantee your ceiling is completely stage. We began above the area of interest as a result of we needed an ideal piece simply above the area of interest as we knew eyes could be drawn there. Wherever you begin simply proceed your design, including one plank at a time and one row at a time and dealing your method up or down.
If you get to the highest or backside of the wall, it’s possible you’ll want to chop your boards in half to fill the hole. For this you’d simply use a desk noticed or a round noticed. (however I feel a desk noticed would in all probability be best and most secure for wooden this slender.)
After
And right here it’s! Our completed wooden plank panel wall! What do you assume? You bought this, proper?!
The lavatory is often the place you begin and finish your day, so it solely is sensible that you’d need a gorgeous house with impeccable inside design to set your temper. We had a lot enjoyable with this challenge and never simply the wooden plank wall, so in fact we are able to’t omit the entire ending particulars.
Can’t wait to see your entire wooden plank accent wall challenge! And ensure to tag us at hashtag #imaremodelaholic for an opportunity to be featured!
- 4’x8′ sheet Maple Veneer Plywood sheeting reduce into 4″ strips
- Ending Nails Pin Nailer
- Stain and Sealant
- Liquid Nails
2. End wooden (stain and seal)
-
After you have chosen the kind of materials and reduce down your sheets, it is time to stain and seal. Once more, selecting the colour of the stain relies on the kind of look you’re going for.
4. Measure and Minimize
-
After you have created your design structure it is time to measure, reduce and cling. We reduce the boards as we had been putting them up onto the partitions, following our brick stacked sample. To determine our size to chop the boards, we measured the width of the wall and divided it by 3.
5. Set up
-
Our favourite half, watching your design and challenge all come collectively. We began simply above the area of interest, gluing our first board into place with caulking, liquid nails. We then progressively moved up ensuring every board was stalked half method over the board beneath.
Query and Solutions:
What are wooden planks on partitions known as?
This might rely on the orientation of the boards, if the entire wall or simply half is roofed.
Typically if the entire wall is roofed, we name in wooden paneling. The planks themselves, could be known as beadboard, v-groove, shiplap, slats, or simply planks. It simply is dependent upon the type of the boards themselves.
If solely the underside half of the wall is roofed, it is likely to be typically thought of wainscot or wainscoting. It is a ornamental wall paneling for a portion of the wall. It protects partitions from injury from chairs (why its generally additionally known as a chair rail), or could also be used to cover injury. There are dozens of kinds of wainscoting, however a preferred variety is board and batten.
Is wooden paneling cheaper than drywall?
The quick reply isn’t any. Typically when putting in wooden paneling, drywall is positioned beneath it anyway. When the partitions are drywalled and seams are correctly taped, this wall construction provides to the R-value or insulative worth of the wall. It additionally creates the proper place so as to add an ornamental accent wooden wall.
Until you may have limitless entry to free, planked and completed wooden, drywall would be the cheaper different. However don’t let that steer you away from the sweetness {that a} wooden function wall provides to a house.
How do you put in wooden planks on partitions?
This tutorial above, explains typically how, however just a few vital first steps are
- First find and mark the studs the place you propose on putting in the wooden paneling. This helps you understand the place to nail.
- Mark with a stage line a beginning row. Ensure that the primary row you put in is completely stage, as a result of all the opposite rows will work off of that.
- Add row by row type the beginning line til the entire part you need coated is put in.
Extra wall remedies to make a shocking function wall:
Strive any of those many nice wall remedy choices.
or attempt greater than 40 different wainscoting kinds
Associated